د. ابراهيم بن محمد العريفي

كلية الهندسة - قسم الهندسة الميكانيكية

المقررات الدراسية

المقررات الدراسية


Material Engineering ME-251

Mechanical Eng. Drawing ME 121

Senior Design I ME 498

Senior Design II ME499

Materials Selection in Design and Manufacturing ME 333

الملفات المرفقة

الساعات المكتبية

الاحد     10-12    الساعات المكتية

الاثنين   10-12    محاضرة      3-2 تمارين

الثلاثاء  1-3         معمل

الاربعاء 10-12    الساعات المكتية

الخميس  10-12    الساعات المكتية


أعلان هام

إعلان هام

التعليم عن بعد وسيلة تعليمية رائعة فل نحسن استخدامها.

أرقام الاتصال

Assistant Professor

Vice Dean of Academic Affair at Common First Year,


Director,


Engineering and Applied Sciences Research Center,


College of Engineering, Majmaah University,
P. O. Box: 66, Al-Majmaah 11952,
Kingdom of Saudi Arabia.
Office: +966-16404 Ex. 3366 and 2597



المقررات

Fundamentals of Engineering Drawing GE 102

Mechanical Engineering Drawing ME 223

Material Engineering ME 251

Senior Design I ME 498

Senior Design II 499

Materials Selection in Design and Manufacturing ME 333

السيرة الذاتية

جامعة المجمعة- المملكة العربية السعودية

التلفون: +966-502222828 الايميل: [email protected]

المعلومات الشخصية


الاسم: ابراهيم بن محمد بن ابراهيم العريفي

المؤهل: دكتوراة في علوم الهندسة الميكانيكية

التخصص: علم النانو والمواد

مجال الاهتمام: علوم المواد ، المواد الحيوية ، تقنية النانو ، ألياف الكربون ، البوليمرات والمركبات.

المسمى الوظيفي: أستاذ مساعد ، رئيس قسم الهندسة المكانيكية ، رئيساً لمركز البحوث الهندسية والعلوم

التطبيقية ، منسق الجودة في الشرق الأوسط ، وكيل للشؤون التعليمية للسنة الأولى المشتركة

في جامعة المجمعة.

الأبعاد الرئيسية:

· واجهة وتطور المشاريع.

· المهنية المستدامه الهندسية.

· المشاركة في مشاريع البحث والندوات.

· فعالية وتشجيع الفريق.

· تطوير ومراقبة استراتيجيات المشروع.

· إظهار الكفاءات في مجالات المختلفة.


المؤهلات العلمية:

2013 – 2017 Wichita State University (WSU) 3.90/4.0 المعدل:

دكتوراة في علوم الهندسة الميكانيكية

مجال التخصص أو الدقيق: علوم المواد والهندسة الميكانيكية

2015 – 2016 Southern Methodist University (SMU) 3.46/4.0 المعدل:

ماجستير العلوم في الهندسة الميكانيكية

التخصص أو الدقيق: المواد وعلوم الهندسة الميكانيكية

2008 – 2009 Eastern Michigan University (EMU) GPA: 3.90/4.0 المعدل: ماجستير العلوم في الهندسة

مجال التخصص أو الدقيق: إدارة المشاريع الهندسية.

2005 – 2008 University of Toledo (UT) 3.40/4.0 المعدل:

بكالوريوس العلوم في الهندسة الميكانيكية.

مشروع التخرج: الطاولة الالكترونية.

التاريخ الوظيفي:


2019 - مستمر جامعة المجمعة

العمل في جامعة المجمعة في السنة الأولى المشتركة وكيل الشؤون التعليمية للسنة الأولى المشتركة في جامعة المجمعة.

2018 - مستمر جامعة المجمعة

العمل في جامعة المجمعة رئيساً لمركز البحوث الهندسية والعلوم التطبيقية.

2017 - 2020 جامعة المجمعة

العمل في جامعة المجمعة بكلية الهندسة كرئيس لقسم الهندسة المكانيكية في جامعة المجمعة.

2017 - 2020 جامعة المجمعة

العمل في جامعة المجمعة في كلية الهندسة منسقاً للجودة لقسم الهندسة المكانيكية بجامعة المجمعة.

2017 - مستمر جامعة المجمعة

العمل في جامعة المجمعة في قسم الهندسة الميكانيكية والصناعية كأستاذ مساعد وتدريس المقررات التالية: (أوتوكاد ، علوم وهندسة المواد ، الرسم الفني وآلة التصميم). أيضا ، العمل مع إدارة المشاريع كرئيس للمشاريع.

2011 - 2013 جامعة المجمعة

العمل كرئيس للمشاريع الهندسية ومحاضر في جامعة المجمعة والإشراف على مشاريع مثل مبنى كليات مدينة رماح ، والإشراف على مشاريع مباني كلية الهندسة ، والاستشارات لتصاميم مباني كلية الهندسة .

مدينة الملك عبد العزيز للعلوم والتقنية KACST- 2011 - 2010

العمل في مدينة الملك عبدالعزيز للعلوم والتقنية كباحث اول في مركز علوم الطاقة التطبيقية.

2001 - 2006 شركة شرق – سابك

العمل في شركة شرق للبتروكيماويات في قسم الصيانة كمهندس فورمان لمدة 5 سنوات.

الدور الوظيفي:

o إجراء إصلاحات وصيانة إيقاف التشغيل والإصلاح الشامل للمعدات.

o إجراء والمشاركة في الصيانة الوقائية والتصحيحية واستكشاف الأخطاء وإصلاحها في المصنع.

o الحصول على شهادة تقدير للعمل الجاد والتميز.

o تمت الموافقة على المقترح من قبل شركة شرق.

التطبيق الصيفي بعد التخرج – سابك 2001

العمل في شركة أرازي سابك قسم الميكانيكية مهندس متدرب لمدة 3 أشهر.

الدور الوظيفي:

o حضور التدريب الفني من خلال قسم الميكانيكية.

o تعلم المهارات الفنية بواسطة مشرفين خبراء.

o كتابة تقرير تقني أسبوعي للمشرف الأكاديمي.

o العمل على تقرير التخرج النهائي وتقديمه إلى الكلية الهندسة.

الخبرات العمل في الولايات المتحدة الامريكية 2017 - 2006

o حضور مؤتمر حول القضايا المتعلقة بتكنولوجيا النفط والغاز في هيوستن ، تكساس.

o الممارسة على شهادات EMCI و PMP وبالتالي أكملت هذه المتطلبات لدرجة الماجستير في العلوم في درجة إدارة المشاريع.

o الحصول على قائمة العميد في قسم الهندسة في (University of Toledo) ؛ كما أنني حافظت على الحضور الأكاديمي المثالي.

o الحصول على الطالب المتميز خريج عام 2017 في جامعة ولاية ويتشيتا.

o عضو نشط ASME والمشاركة في العديد من مؤتمرات ASME.

النشر العلمي:


ألاوراق العلمية:

1. Asadi, A. and Alarifi, I.M., 2020. Effects of ultrasonication time on stability, dynamic viscosity, and pumping power management of MWCNT-water nanofluid: an experimental study. Scientific reports, 10(1), pp.1-10.

2. Alarifi, I.M., Readiness Switching Traditional Learning Form at Saudi Arabia University as a Quick Action to the COVID-19 Virus Pandemic. International Journal of Disaster Recovery and Business Continuity, 2(72.11), p.351.

3. Alarifi, I.M., 2020. In-situ annealing and characterization of superhydrophobic electrospun poly (acrylonitrile) ionized nanofibre smart material properties. Bulletin of Materials Science, 43(1), pp.1-11.

4. Awan, A., Pasha, R.A., Butt, M.S., Malik, R.A., Alarifi, I.M., Alzaid, M., Latif, M., Naseer, A., Saleem, M. and Alrobei, H., 2020. Corrosion and wear behavior of TiN PVD coated 304 stainless-steel. Journal of Mechanical Science and Technology, pp.1-6.

5. Alarif, I.M., Institutional classification factors research strategy of Saudi Arabia University ranking. Trends in Res, 3.

6. Malik, R.A., Maqbool, A., Khan, S.A., Saleem, M., Butt, M.S., Alarifi, I.M., Hussain, A., Lee, S. and Kim, M.H., 2020. Comparison of strain and ferroelectric properties of La, Nb and Li, Nb co-modified BNKT–ST ceramics.

7. Butt, M.S., Maqbool, A., Umer, M.A., Saleem, M., Malik, R.A., Alarifi, I.M. and Alrobei, H., 2020. Enhanced Mechanical Properties of Surface Treated AZ31 Reinforced Polymer Composites. Crystals, 10(5), p.381. (IF = 2.404 R = Q2).

8. Asadi, A., Bakhtiyari, A.N. and Alarifi, I.M., 2020. Predictability evaluation of support vector regression methods for thermophysical properties, heat transfer performance, and pumping power estimation of MWCNT/ZnO–engine oil hybrid nanofluid. ENGINEERING WITH COMPUTERS. (IF = 3.938 R = Q1).

9. Alarifi, I.M., 2020. Investigation into the morphological and mechanical properties of date palm fiber‐reinforced epoxy structural composites. Journal of Vinyl and Additive Technology. (IF = 1.55 R = Q2).

10. Alshayji, A., Asadi, A. and Alarifi, I.M., 2020. On the heat transfer effectiveness and pumping power assessment of a diamond-water nanofluid based on thermophysical properties: An experimental study. Powder Technology. (IF = 3.41, R = Q1).

11. Asadi, A., Alarifi, I.M. and Foong, L.K., 2020. An experimental study on characterization, stability and dynamic viscosity of CuO-TiO2/water hybrid nanofluid. Journal of Molecular Liquids, p.112987. (IF = 4.56, R = Q1).

12. Abd-Elhady, A.A., Sallam, H.E.D.M., Malik, R.A., Alarifi, I.M. and El-Bagory, T.M., 2020. Investigation of fatigue crack propagation in steel pipeline repaired by glass fiber reinforced polymer. Composite Structures, 242, p.112189. (IF = 4.829, R = Q1).

13. Lyu, Z., Asadi, A., Alarifi, I.M., Ali, V. and Foong, L.K., 2020. Thermal and Fluid Dynamics Performance of MWCNT-Water Nanofluid Based on Thermophysical Properties: An Experimental and Theoretical Study. Scientific Reports, 10(1), pp.1-14. (IF = 4.011, R = Q1).

14. Alarifi, I.M., 2020. Structural analysis of hexagonal and solid carbon fibers composite. Polymer Testing, p.106392. (IF = 2.943, R = Q1).

15. Abbas, N., Malik, M.Y., Nadeem, S. and Alarifi, I.M., 2020. On extended version of Yamada–Ota and Xue models of hybrid nanofluid on moving needle. The European Physical Journal Plus, 135(2), p.145. (IF = 2.612, R = Q2).

16. Alhajri, I.H., Alarifi, I.M., Asadi, A., Nguyen, H.M. and Moayedi, H., 2020. A general model for prediction of BaSO4 and SrSO4 solubility in aqueous electrolyte solutions over a wide range of temperatures and pressures. Journal of Molecular Liquids, 299, p.112142. (IF = 4.56, R = Q1).

17. Asadi, A., Alarifi, I.M., Nguyen, H.M. and Moayedi, H., Feasibility of least-square support vector machine in predicting the effects of shear rate on the rheological properties and pumping power of MWCNT–MgO/oil hybrid nanofluid based on experimental data. Journal of Thermal Analysis and Calorimetry, pp.1-16. (IF = 2.471, R = Q2).

18. Asmatulu, R., Bollavaram, P.K., Patlolla, V.R., Alarifi, I.M. and Khan, W.S., Investigating the effects of metallic submicron and nanofilms on fiber-reinforced composites for lightning strike protection and EMI shielding. Advanced Composites and Hybrid Materials, pp.1-18.

19. Alamir, M.A., Alarifi, I.M., Khan, W.A., Khan, W.S. and Asmatulu, R., 2019. Electrospun Nanofibers: Preparation, Characterization and Atmospheric Fog Capturing Capabilities. Fibers and Polymers, 20(10), pp.2090-2098. (IF = 1.44, R = Q1).

20. Kumar, K.G., Khan, M.N., Osman, M., Alharbi, A.R., Rahimi-Gorji, M. and Alarifi, I.M., 2019. Slip flow over a non-Newtonian fluid through a Darcy–Forchheimer medium: Numerical approach. Modern Physics Letters B, p.1950448. (IF = 0.929, R = Q3).

21. Luo, L., Shah, N.A., Alarifi, I.M. and Vieru, D., 2019. Two‐layer flows of generalized immiscible second grade fluids in a rectangular channel. Mathematical Methods in the Applied Sciences. (IF = 1.533, R = Q2).

22. Nadeem, S., Alblawi, A., Muhammad, N., Alarifi, I.M., Issakhov, A. and Mustafa, M.T., 2019. A computational model for suspensions of motile micro-organisms in the flow of ferrofluid. Journal of Molecular Liquids, p.112033. (IF = 4.56, R = Q1).

23. Khan, M.N., Osman, M., Alharbi, A.R., Gorji, M.R. and Alarifi, I.M., 2019. Improving the efficiency of gas turbine-air bottoming combined cycle by heat exchangers and bypass control valves. Physica Scripta. (IF = 2.151, R = Q2).

24. Bayat, M., Alarifi, I.M., Khalili, A.A., El-Bagory, T.M., Nguyen, H.M. and Asadi, A., 2019. Thermo-mechanical contact problems and elastic behaviour of single and double sides functionally graded brake disks with temperature-dependent material properties. Scientific Reports, 9(1), pp.1-16. (IF = 4.011, R = Q1).

25. Asmatulu, R., Erukala, K.S., Shinde, M., Alarifi, I.M. and Gorji, M.R., 2019. Investigating the effects of surface treatments on adhesion properties of protective coatings on carbon fiber-reinforced composite laminates. Surface and Coatings Technology, p.125006. (IF = 3.192, R = Q1).

26. Alarifi, I.M., 2019. Investigation the conductivity of carbon fiber composites focusing on measurement techniques under dynamic and static loads. Journal of Materials Research and Technology. (IF = 3.327, R = Q1).

27. Tlili, I., Osman, M., Barhoumi, E.M., Alarifi, I.M, Abo-Khalil, A.G., Praveen, R.P. and Sayed, K., 2019. Performance enhancement of a humidification–dehumidification desalination system. Journal of Thermal Analysis and Calorimetry, pp.1-11. (IF = 2.471, R = Q2).

28. Tlili, I., Osman, M., Alarifi, I., Belmabrouk, H., Shafee, A. and Li, Z., 2019. Performance enhancement of a multi-effect desalination plant: A thermodynamic investigation. Physica A: Statistical Mechanics and its Applications, p.122535. (IF = 2.5, R = Q2).

29. Mahanthesh, B., Animasaun, I.L., Rahimi-Gorji, M. and Alarifi, I.M., 2019. Quadratic convective transport of dusty Casson and dusty Carreau fluids past a stretched surface with nonlinear thermal radiation, convective condition and non-uniform heat source/sink. Physica A: Statistical Mechanics and its Applications, p.122471. (IF = 2.5, R = Q2).

30. Alarifi, I.M., Movva, V., Rahimi-Gorji, M. and Asmatulu, R., 2019. Performance analysis of impact-damaged laminate composite structures for quality assurance. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(8), p.345. (IF = 1.74, R = Q3).

31. Kumar, K.G., Avinash, B.S., Rahimi-Gorji, M. and Alarifi, I.M., 2019. Optical and electrical properties of Ti1-XSnXO2 nanoparticles. Journal of Molecular Liquids, p.111556. (IF = 4.56, R = Q1).

32. Adesanya, S.O., Onanaye, A.S., Adeyemi, O.G., Rahimi-Gorji, M. and Alarifi, I.M., 2019. Evaluation of heat irreversibility in couple stress falling liquid films along heated inclined substrate. Journal of Cleaner Production, p.117608. (IF = 6.39, R = Q1)

33. Uddin, S., Mohamad, M., Rahimi-Gorji, M., Roslan, R. and Alarifi, I.M., Fractional electro-magneto transport of blood modeled with magnetic particles in cylindrical tube without singular kernel. Microsystem Technologies, pp.1-10. (IF = 1.51, R = Q3).

34. Kumar, K.G., Rahimi-Gorji, M., Reddy, M.G., Chamkha, A.J. and Alarifi, I.M., Enhancement of heat transfer in a convergent/divergent channel by using carbon nanotubes in the presence of a Darcy–Forchheimer medium. Microsystem Technologies, pp.1-10. (IF = 1.51, R = Q3).

35. Hajizadeh, A., Shah, N.A., Shah, S.I.A., Animasaun, I.L., Rahimi-Gorji, M. and Alarifi, I.M., 2019. Free convection flow of nanofluids between two vertical plates with damped thermal flux. Journal of Molecular Liquids, p.110964. (IF = 4.56, R = Q1).

36. Kasaragadda, S., Alarifi, I.M., Rahimi-Gorji, M. and Asmatulu, R., 2019. Investigating the effects of surface superhydrophobicity on moisture ingression of nanofiber-reinforced bio-composite structures. Microsystem Technologies, pp.1-13. (IF = 1.51, R = Q3).

37. Asadi, A., Alarifi, I.M., Ali, V. and Nguyen, H.M., 2019. An Experimental Investigation on the Effects of Ultrasonication Time on Stability and Thermal Conductivity of MWCNT-water Nanofluid: Finding the Optimum Ultrasonication Time. Ultrasonics Sonochemistry, p.104639. (IF = 7.27, R = Q1).

38. Souayeh, B., Reddy, M.G., Sreenivasulu, P., Poornima, T., Rahimi-Gorji, M. and Alarifi, I.M., 2019. Comparative analysis on non-linear radiative heat transfer on MHD Casson nanofluid past a thin needle. Journal of Molecular Liquids, 284, pp.163-174. (IF = 4.56, R = Q1).

39. Chinni, G., Alarifi, I.M., Rahimi-Gorji, M. and Asmatulu, R., 2019. Investigating the effects of process parameters on microalgae growth, lipid extraction, and stable nanoemulsion productions. Journal of Molecular Liquids, p.111308. (IF = 4.56, R = Q1).

40. EL-Bagory, T.M., Alarifi, I.M. and Younan, M.Y., Prediction of Mechanical Properties for Curved Dumbbell Shaped Specimen at Different Orientation Angles of Ring Hoop Tension Test. Advanced Engineering Materials. (IF = 2.90, R = Q2).

41. Alarifi, I.M., Alkouh, A.B., Ali, V., Nguyen, H.M. and Asadi, A., 2019. On the rheological properties of MWCNT-TiO2/oil hybrid nanofluid: An experimental investigation on the effects of shear rate, temperature, and solid concentration of nanoparticles. Powder Technology. (IF = 3.41, R = Q1).

42. Akermi, M., Jaballah, N., Alarifi, I.M., Rahimi-Gorji, M., Chaabane, R.B., Ouada, H.B. and Majdoub, M., 2019. Synthesis and characterization of a novel hydride polymer P-DSBT/ZnO nano-composite for optoelectronic applications. Journal of Molecular Liquids, 287, p.110963. (IF = 4.56, R = Q1).

43. Alarifi, I.M., Abokhalil, A.G., Osman, M., Lund, L.A., Ayed, M.B., Belmabrouk, H. and Tlili, I., 2019. MHD Flow and Heat Transfer over Vertical Stretching Sheet with Heat Sink or Source Effect. Symmetry, 11(3), p.297. (IF = 2.14, R = Q2).

44. Swarna, V.S., Alarifi, I.M., Khan, W.A. and Asmatulu, R., 2019. Enhancing fire and mechanical strengths of epoxy nanocomposites for metal/metal bonding of aircraft aluminum alloys. Polymer Composites. (IF = 2.26, R = Q2).

45. Alarifi, I.M., Khan, W.S. and Asmatulu, R., 2018. Synthesis of electrospun polyacrylonitrile-derived carbon fibers and comparison of properties with bulk form. PloS one, 13(8), p.e0201345. (IF = 2.77, R = Q1).

46. Alarifi, I.M., Alharbi Abdulaziz, R., Khan, M.N. and Waseem, S.K., 2018. Asmatulu Ramazan. Water treatment using electrospun PVC/PVP nanofibers as filter medium. Int J Material Sci Res, 1(2), pp.43-49.

47. Alharbi, A., Alarifi, I.M., Khan, W.S., and Asmatulu, R. “Synthesis and Characterization of Electrospun Polyacrylonitrile/Graphene Nanofibers Embedded with SrTiO3 /NiO Nanoparticles for Water Splitting.” Journal of Nanoscience and Nanotechnology, 2017, Vol. 17, pp.1–9. (IF = 1.09, R = Q4).

48. Alarifi, I.M., Khan, W.S., Rahman, A.K.M., Kostogorova-Beller, Y., and Asmatulu, R. “Synthesis, Analysis and Simulation of Carbonized Electrospun Nanofibers Infused Carbon Prepreg Composites for Improved Mechanical and Thermal Properties,” Fibers and Polymers, 2016, Vol. 17, pp. 1449-1455. (IF = 1.44, R = Q1).

49. Asmatulu, R., Shinde, M.A., Alharbi, A., and Alarifi, I.M. “Integrating Graphene and C60 into TiO2 Nanofibers via Electrospinning Process for the Enhanced Energy Conversion Efficiencies,” Macromolecular Symposia, 2016, Vol. 365, pp. 128-139. (IF = 0.91, R = Q3).

50. Alharbi, A., Alarifi, I.M., Khan, W.S., and Asmatulu, R. “Highly Hydrophilic Electrospun Polyacrylonitrile / Polyvinypyrrolidone Nanofibers Incorporated with Gentamicin as Filter Medium for Dam Water and Wastewater Treatment,” Journal of Membrane and Separation Technology, 2016, Vol. 5, pp. 38-56.

51. Alharbi, A., Alarifi, I.M., Khan, W.S., and Asmatulu, R. “Synthesis and Analysis of Electrospun SrTiO3 Nanofibers with NiOX Nanoparticles Shells as Photocatalysts for Water Splitting,” Macromolecular Symposia, 2016, Vol. 365, pp. 246-257. (IF = 0.91, R = Q3).

52. Alarifi, I.M., Alharbi, A., Alsaiari, O., and Asmatulu, R. “Training the Engineering Students on Nanofiber-based SHM Systems," Transactions on Techniques in STEM Education, 2016, Vol. 1, pp. 59-67.

53. Mahat, K.B., Alarifi, I.M., Alharbi, A. and Asmatulu, R. “Effects of UV Light on Mechanical Properties of Carbon Fiber Reinforced PPS Thermoplastic Composites.” In Macromolecular Symposia, 2016, Vol. 365, No. 1, pp. 157-168. . (IF = 0.91, R = Q3).

54. Alarifi, I.M., Alharbi, A., Khan, W.S., Rahman, A.K.M. and Asmatulu, R. “Mechanical and Thermal Properties of Carbonized PAN Nanofibers Cohesively Attached to Surface of Carbon Fiber Reinforced Composites.” In Macromolecular Symposia, 2016, Vol. 365, No. 1, pp. 140-150. . (IF = 0.91, R = Q3).

55. Alarifi, I.M., Alharbi, A., Khan, W.S., and Asmatulu, R. “Carbonized Electrospun PAN Nanofibers as Highly Sensitive Sensors in SHM of Composite Structures,” Journal of Applied Polymer Sciences, 2015, DOI: 10.1002/app.43235. (IF = 2.18, R = Q2).

56. Alarifi, I.M., Alharbi, A., Khan, W.S, Swindle, A. and Asmatulu, R. “Thermal, Electrical and Surface Properties of Electrospun Polyacrylonitrile Nanofibers for Structural Health Monitoring,” Materials, 2015, Vol. 8, pp. 7017-7031. (IF = 2.97, R = Q1).

ألاوراق العلمية للمؤتمرات:

1. Almotery, A.G., Alsaiari, S.M., Alyoussef, A.Y., Alsahli, F.M., Alharbi, M.O., MAA El-Bagory, T. and Alarifi, I.M., Fabrication and Characterization of the Recycling of Composite Palm Materials, Shell, Leaves and Branches in Saudi Arabia. In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers Digital Collection.

2. Al-Harbi, O.E., Almansour, S.M., Alomair, M., Ali, Y., Altulohi, N.B., Osman, M. and Alarifi, I.M., Evaluate the Mechanical and Thermal Behavioural Deformation of Auxetic Composite Nano-Carbon Fibers. In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers Digital Collection.

3. Alqahtani, A.M., Albulayhid, T.K., Alotaibi, M.N., Alarifi, I.M. and El-Bagory, T.M., Fracture Behavior of Cracked Ring Specimen at Different Crack Positions. In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers Digital Collection.

4. Khan, M.N., Alarifi, I.M. and Tlili, I., Comparative Energy and Exergy Analysis of Proposed Gas Turbine Cycle With Simple Gas Turbine Cycle at Same Operational Cost. In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers Digital Collection.

5. El-Bagory, T.M., Younan, M.Y. and Alarifi, I.M., 2018, July. Failure Analysis of Ring Hoop Tension Test (RHTT) Specimen under Different Loading Conditions. In ASME 2018 Pressure Vessels and Piping Conference (pp. V03AT03A024-V03AT03A024). American Society of Mechanical Engineers.

6. Alarifi, I.M., 2017. Fabrication and characterization of electrospun polyacrylonitrile carbonized fibers as strain gauges in composites for structural health monitoring applications (Doctoral dissertation, Wichita State University).

7. Alarifi, I.M., Alharbi, A., and Asmatulu, R. “Fabrication and Characterization of Carbonized Polyacrylonitrile Nanofibers for Composite Aircraft and Wind Turbine manufacturing,” 12th GRASP Symposium, Wichita State University, Wichita, KS, April 29, 2016 (extended abstract published).

8. Asmatulu, R., Yeoh, J., Alarifi, I.M., and Alharbi, A. “Effects of Edge Grinding and Sealing on Mechanical Properties of Machine Damaged Laminate Composites,” SPIE Smart Structures/Non-destructive Evaluation Conference, Las Vegas, NV, March 20-24, 2016, 10 pages.

9. Alharbi, A., Alarifi, I.M., Khan, W.S., and Asmatulu, R. “Comparative Studies on Different Nanofiber Photocatalysts for Water Splitting,” SPIE Smart Structures/Nondestructive Evaluation Conference, Las Vegas, NV, March 20-24, 2016, 10 pages.

10. Seewoogolam, V., Alarifi, I.M., and Asmatulu, R. “Highly Robust Electrospun Nanofiber Films for Design of MAV Wings,” CAMX Conference, Anaheim, CA, September 26-29, 2016, 11 pages.

11. Swarna, V.S., Alarifi, I.M., Patlolla, V.R., and Asmatulu, R. “Improving the Strengths of Metal-metal Bonding via Inclusion of Graphene Nanoflakes into Adhesive Joints,” CAMX Conference, Anaheim, CA, September 26-29, 2016, 11 pages.

12. Shagor, R.M.R., Alarifi, I.M., and Asmatulu, R. “Effects of Silanized Graphene Nanoflakes on Mechanical Properties of Carbon Fiber Reinforced Laminate Composites,” CAMX Conference, Anaheim, CA, September 26-29, 2016, 10 pages.

13. Alarifi, I.M., Alharbi, A., Khan, W.S., and Asmatulu, R. “Electrospun Nanofibers for Improved Electrical Conductivity of Fiber Reinforced Composites,” SPIE Smart Structures/Non-destructive Evaluation Conference, San Diego, CA, March 8-12, 2015, 8 pages.

14. Shinde, M.A., Alarifi, I.M., Alharbi, A., and Asmatulu, R. “Electrospun TiO2 Nanofibers Incorporated with Graphene Nanoflakes for Energy Conversion,” SPIE Smart Structures/Non-destructive Evaluation Conference, San Diego, CA, March 8-12, 2015, 7 pages.

15. Alharbi, A., Alarifi, I.M., Khan, W.S., and Asmatulu, R. “Electrospun Strontium Titanata Incorporated with Nickel Oxide Nanoparticles for Improved Photocatalytic Activities,” SPIE Smart Structures/Non-destructive Evaluation Conference, San Diego, CA, March 8- 12, 2015, 8 pages.

16. Alarifi, I.M., Alharbi, A., Alsaiari, O., and Asmatulu, R. “Training the Engineering Students on Nanofiber-based SHM Systems,” The 2015 ASEE Zone III Conference, Springfield, MO, September 23-25, 2015, 10 pages.

17. Alharbi, A., Alarifi, I.M, Khan, W.S., and Asmatulu, R. “Co-Axial Electrospinning of Strontium Titanata Nanofibers Associated with Nickel Oxide Nanoparticles for Water Splitting,” CAMX Conference, Dallas, TX October 27-29, 2015, 13 pages.

18. Alarifi, I.M., Alharbi, A., Khan, W.S., and Asmatulu, R. “Thermal and Electrical Properties of Carbonized PAN Nanofibers for Improved Surface Conductivity of Carbon Fiber Composites,” CAMX Conference, Dallas, TX October 27-29, 2015, 13 pages.

19. Faisal, M.S.S., Njoku, U., Alarifi, I.M., and Asmatulu, R. “Nanocomposite Sealants for the Edge and Hole Treatment of Aircraft Carbon Fiber Composites,” CAMX Conference, Dallas, TX October 27-29, 2015, 13 pages.

فصول الكتب العلمية:

1. Alarifi, I.M., Prasad, B. and Uddin, M.K., 2020. Conducting Polymer Membranes and Their Applications. In Self-standing Substrates (pp. 147-176). Springer, Cham.

2. Alarifi, I.M., Khan, W.S., Rahman, M.M. and Asmatulu, R., 2017. Mitigation of lightning strikes on composite aircraft via micro and nanoscale materials. THE ROYAL SOCIETY. Advances in Nanotechnology, 2, p.17.

3. Alharbi, A., Alarifi, I.M., Khan, W., and Asmatulu, R. “Semiconductor Nanofibers for Water Splitting and Energy Conversion,” in Advances in Materials Science Research, Nova Science Publishers, Inc., Editor M. C. Wythers, 2015, Vol. 21, pp. 133-156.

4. Alarifi, I.M., Alharbi, A., Khan, W., and Asmatulu, R. “Structural Health Monitoring of Composite Aircraft,” in Advances in Materials Science Research, Nova Science Publishers, Inc., Editor M. C. Wythers, 2015, Vol. 21, pp. 111-132.

براءة الاختراع:

1. Pre-Cracking Machine for Double Cracks on the External Diameter of Ring Specimens, Patent no. 118400229, 2018.

الجوائز الفنية:

المؤتمرات والدورات التدريبية

النشاط

المعهد

الموقع

التاريخ

التدريب

Heat Exchanger Design Performance & Operation

ISCOSA

Dammam

Sept, 2005

التدريب

Advanced Tech. Report Writing

Al-Tawail

Jubail

Feb,2006

التدريب

Pumps

Saudi Electricity Com.

Dammam

Oct,2001

المؤتمر

Oil & Gas Technology

SME

Houston, TX

Feb, 2009

التدريب

Basic Supervision

SABIC

Jubail

Feb, 2005

التدريب

Effective Communication

Al-Tawail

Jubail

Feb, 2006

التدريب

SAP Training (PM - MM Module)

SHARQ COM.

Jubail

Sept, 2005

التدريب

Machinery Failure Analysis & Prevention

Jubail Industrial College

Jubail

Nov, 2005

التدريب

Safety For Employees

SHARQ COM.

Jubail

May, 2005

التدريب

Microsoft Office (Excel, PowerPoint and Words)

New Horizon

Jubail

April,2004

التدريب

Time Management

Expert Rating Global

Ann Arbor, MI

Aug, 2009

الشهادة

Excellent & Hard Professional support

SHARQ COM.

Jubail

Dec, 2001

الشهادة

Ideal Proposal

SHARQ COM.

Jubail

Dec, 2003

الشهادة

Perfect Attendance

University of Toledo

Toledo, USA

Summer & Fall Term, 2006

الشهادة

Dean's List Recognition

University of Toledo

Toledo, USA

Spring Term, 2007

الشهادة

Al-Riyadh Project Program Information System

Riyadh (ADA)

Riyadh

Nov, 2012

ملخص المؤهلات:


§ عضو نشط كعضو محرر في المجلة الدولية Journal of Nanomaterials.

§ الحصول على جائزة التميز في البحث العلمي 2019 بجامعة المجمعة.

§ عضو نشط كمراجع للمجلة الدولية International Journal of Heat and Mass Transfer (Elsevier).

§ مقيم دولي وعضو نشط في منظمة ABET

§ عضو نشط كمراجع للمجلة الدولية Journal of Energy Storage (Elsevier)

§ عضو نشط كعضو محرر في المجلة الدولية International Journal of Material Science and Research

§ عضو في النادي السعودي بامريكا Toledo, OH, the Society of Mechanical Engineers (ASME 2019), (PMI) & The Fifth Discipline Professional Lounge.

§ عضو نشط كمراجع للمجلة الدولية Elsevier Journals

§ عضو نشط كمراجع للمجلة الدولية Asia-Pacific Journal of Chemical Engineering

§ عضو نشط كمراجع للمجلة الدولية Journal of Composite Materials (SAGE).

§ عضو نشط كمراجع للمجلة الدولية ACS Applied Polymer Materials.

§ عضو نشط كمراجع للمجلة الدولية ACS Omega journal

§ عضو نشط كمراجع للمجلة الدولية BioResource journal

§ عضو نشط كمراجع للمجلة الدولية Advanced Engineering Materials Journal

§ عضو نشط كمراجع للمجلة الدولية Chemical Intermediates journals

§ منسقاً للجودة لقسم الهندسة المكانيكية بجامعة المجمعة.

المهارات الفنية للبرامج:


§ Proficient in MATLAB, Minitab, Microsoft Project 2007, Visual Basic and Microsoft office, Mathematica and ANSYS.

§ Teaching AutoCAD 2012.

المهارات الشخصية:

§ اللغات التي يتحدث بها: اللغة العربية والانجليزية.

§ الاهتمامات: التجميع والبرمجة واستكشاف الأخطاء وإصلاحها.


إحصائية الموقع

عدد الصفحات: 3

البحوث والمحاضرات: 1

الزيارات: 2992